Safety
Introduction
Determining Panel and Plate Locations
Use the following guidelines to determine a location to mount the control panel
and instruction plate:
• Consider the wire harness and hose routing.
• Consider accessibility during operation and maintenance.
• Install instruction plates near their applicable operator panels.
Product Overview
Installation
Operation
Determining Hose Routing
Use the following guidelines when routing the hoses:
• Route hoses in a straight line whenever possible.
• Do not pinch or kink hoses.
• Do not secure hoses to moving parts.
• Do not secure hoses near excessive heat.
• Do not secure hoses near sharp edges.
Determining Cable and Wire Routing
Use the Wiring Best Practices document, available at www.waterousco.com, as
a guide to select and route wiring for your application.
|
37
90
Maintenance
Troubleshooting