Table of Contents
Advertisement
Safety
Introduction
Connecting the Auto-Sync System
1
2
Product Overview
Installation
3
Operation
|
47
90
Maintenance
Troubleshooting
Use the illustration and instructions to connect the
auto-sync switch wires and components.
1 Secure the power wire from the auto-sync
switch to terminal 4 on the relay panel.
2 Secure the ground wire to the grounding
screws on the auto-sync mounting bracket
and the relay panel.
3 Connect the auto-sync switch connector and
solenoid wire harness connector to the wire
harness extension.
Advertisement
Table of Contents
