Table of Contents
Advertisement
Safety
Introduction
Calibrating the System—Auto Mode
Product Overview
1
2
Installation
Operation
|
65
90
Maintenance
Troubleshooting
Use the illustrations and instructions to adjust the
system in auto mode.
When operating the system:
• Always start the system in auto or unload mode.
• Always circulate enough cool water to regulate
the compressor oil temperature during operation.
• Never operate the system with the compressor oil
temperature above 250°F (121°C).
1 Make sure that the pump has 100 psi (10.3 bar)
at the main discharge with minimal flow.
2 Toggle the auto-sync switch to the Auto
position.
Advertisement
Table of Contents
