Operating Environment; Non-Operating Environment; Non-Operating Environment - Unisys Aquanta CP Series Configuration Manual

System Specifications

Operating Environment

The following are the conditions under which you can turn on and operate your system
without damage to any of its components. Exceeding these parameters may cause
damage to your system.
Description
Temperature
Thermal change
Relative humidity
Altitude
Maximum
vibration
Shock

Non-Operating Environment

The following are the conditions under which your system will not sustain damage, as
long as it is turned off. Exceeding these parameters may cause damage to your system.
Table A–21. Non-operating Environment
Description
Temperature
Thermal change
Relative humidity
Altitude
Maximum
vibration
Shock
A–26
Table A–20. Operating Environment
+55.4° F to +95° F (+13° C to +35° C)
18° F per hour (10° C per hour)
10% to 80% noncondensing
Sea level to 8,000 ft (2,438.4 m)
0.02 in. (0.05 cm) displacement from 5 to 16 Hz; 0.25 G from 16
to 300 Hz, with a sweep rate of 0.5 octaves per minute.
4 Gs amplitude with a 10 ms duration, half sine wave.
-40° F to +149° F (-40° C to +65° C)
54° F per hour (30° C per hour)
0% to 95% noncondensing
Sea level to 14,000 ft (4,267.2 m)
0.1 in. (0.254 cm) displacement from 5 to 12 Hz; 0.75 G from 12
to 300 Hz with a sweep rate of 0.5 octaves per minute.
20 Gs amplitude with a 10 ms duration, half sine wave.
Range
Range
3814 9779–000