About This Guide; Who Should Use This Guide; Organization - Unisys Aquanta CP Series Configuration Manual

About This Guide

The Aquanta CP Series Upgrade and Configuration Guide for the CWP 50021 tells
you how to upgrade the hardware, change the BIOS settings, and troubleshoot a CWP
50021 system. This guide also provides detailed technical specifications for your
system.

Who Should Use This Guide

This guide assumes that you are a computer technician, network administrator, or
hardware engineer. If you are an end user, you should seek the help of a professional
to perform the steps described in this guide.

Organization

This guide is organized as follows:
Section 1. Upgrading Your System
This section explains how to upgrade your system hardware, including adding more
memory, feature boards, and various types of disk drives.
Section 2. Configuring Your System
This section describes the BIOS Setup utility and how to change the BIOS settings
after you've upgraded your hardware. It also discusses preloaded software,
applications, and device drivers.
Section 3. Troubleshooting Your System
This section describes troubleshooting methodology, advanced solutions to common
installation problems, and POST (Power On Self Test) beep codes and messages.
Appendix A.System Specifications
This appendix provides detailed specifications for your system, including electrical and
environmental specifications, the memory map, I/O address map, system interrupt
assignments, and Direct Memory Access (DMA) channels.
3814 9779–000 xi