Upgrading The Processor - Unisys Aquanta CP Series Configuration Manual

To replace the front panel:
1. Slide the front panel/drive assembly into the chassis until all parts are flush.
2. Replace the four screws that attach the front panel to the chassis.
3. Reconnect the power and drive cables to each drive.
4. Replace the system unit cover, as described earlier in this section.
5. Reconnect the power cords and all peripherals. Turn the system on.

Upgrading the Processor

Your system supports Pentium P54C and P55C processors. The Pentium P54C
operates at 75, 90, 100, 120, 133, 150, 166, or 200 MHz. The Pentium P55C operates
at 166 or 200 MHz. When you ordered your system, you specified the speed and
model of your processor. If you want to upgrade to a faster processor, contact your
Unisys Sales Representative for processor availability.
To upgrade your processor, complete the following steps.
3814 9779-000
Upgrading Your System
1–7