Dram Memory; Sample System Configuration Screen - Unisys Aquanta CP Series Configuration Manual

Figure 1–4. Sample System Configuration Screen
CPU Type : Pentium
CPU Speed : 200
System Memory : 640 KB
Extended Memory : 31744 KB
Shadow RAM : 384 KB
Cache RAM : 256 KB
Hard Disk 1 : 1091 Mb
Hard Disk 2 : CD-ROM
COM Ports : 03F8 02F8
LPT Ports : 0378

DRAM Memory

•
All memory resides on the system board using industry standard 72-pin SIMM
technology.
•
SIMMs are 60ns, with tin-lead connectors. You can use either EDO SIMMs or
Fast Page SIMMs with parity and ECC mode enabled.
•
Two SIMM sockets are provided for base memory.
•
The system board is upgradeable to 128MB DRAM on the motherboard.
•
SIMMs must be identical in make, type and speed.
•
The BIOS automatically recognizes the new amount of memory and it is not
necessary to run any set-up program. It recognizes the SIMM with or without
parity. By default, the BIOS does not check for parity. However, the CMOS can
be set to check for parity, if so desired.
3814 9779-000
Phoenix BIOS Setup Utility
System ROM : F240-FFFF
BIOS Date : 06/13/97
Bank 0 SIMM : Fast Page
Display Type: EGA\VGA
PS/2 Mouse : Installed
Diskette A : 1.44/1.25 Mb, 3 "
Diskette B : Disabled
PCI Slot 1 IRQ : None
PCI Slot 2 IRQ : None
On-board LAN IRQ : IRQ 10
On-board VGA IRQ : IRQ 9
Upgrading Your System
B1801_04
1–11