Two-Level Password Security; Power Management Enhancements; Bios Setup And Cmos Configuration; Plug And Play Enhancement - Unisys Aquanta CP Series Configuration Manual

System Specifications

Two-Level Password Security

The Supervisor password controls access to the CMOS settings. The User password
controls access to the workstation. If both passwords are set, you need the User
password to access the workstation, and the Supervisor password to access the CMOS
settings.

Power Management Enhancements

The Power Management feature enables you to maximize power savings, maximize
performance while saving energy, select customized settings, or use your system with
energy savings turned off.

BIOS Setup and CMOS Configuration

The BIOS Setup utility is used to configure your hardware. All settings are stored in
128 bytes of CMOS memory. CMOS memory can be cleared by removing the battery
for 15 seconds.

Plug and Play Enhancement

The BIOS is fully plug and play compatible per Intel and Microsoft specification
V1.1u. It supports Boot Device Configuration. However, at this time, the BIOS does
not support Dynamic Events Configuration.
Boot Device Configuration:
•
Configures the system board
•
Configures Plug and Play cards
•
Lists configuration information

3-Mode FDD Support

The BIOS supports 3-Mode Floppy drives.
A–4 3814 9779–000