3.7.11 PowerOn By Alarm
When Enabled, your can set the date and time at which the RTC (real-
time clock) alarm awakens the system from Suspend mode. The choices:
Enabled, Disabled.
3.7.12 Primary IDE 0 (1) and Secondary IDE 0 (1)
When Enabled, the system will resume from suspend mode if Primary
IDE 0 (1) or Secondary IDE 0 (1) is active. The choice: Enabled, Dis-
abled.
3.7.13 FDD, COM, LPT PORT
When Enabled, the system will resume from suspend mode if FDD, COM
port, or LPT port is active. The choice: Enabled, Disabled.
3.7.14 PCI PIRQ [A-D]#
When Enabled, the system will resume from suspend mode if interrupt
occurs. The choice: Enabled, Disabled.
Figure 3.8: Power management setup screen (2)
41
Chapter 3