Troubleshooting - Respekta KM6600IB-28 Installation & User's Instructions

7 : TROUBLESHOOTING

7.1 Troubleshooting
Problem
The induction hob
does not turn on.
The touch buttons do
not respond.
The touch buttons are
difficult to use.
The ceramic glass top
is scratched.
Some pots/pans emit
crackles or clicks.
The induction hob
emits a low humming
noise when used at a
high temperature.
Noise from the
induction hob fan.
The cookware does
not heat up and this
symbol flashes on the
display:
Possible causes
No power.
The buttons are locked.
It is possible that there is a light film
of water on the controls, or that you
are using your fingertip to press on
the buttons.
Cookware with rough
Sponges are too abrasive or cleaning
products are unsuitable.
This may be due to the cookware
type (layers of different metals vibrate
differently).
This is caused by induction cooking
technology.
A fan built into your induction hob
activates to protect the electronics
from overheating. It may continue to
work even after turning off the hob.
The induction hob cannot detect the
cookware because it is not suitable
for induction cooking.
The induction hob cannot detect the
cookware because it is too small
for the hotplate or it is not properly
aligned/centred on it.
Remedy
Make sure that the induction hob
is connected to the mains and that
it is switched on. Check the main
power switch of your home. If you
have checked everything and the
problem persists, contact a qualified
technician.
Unlock the controls. See the "Control
lock button (child safety lock)" section
and follow the instructions.
Make sure the area around the
controls is dry, use your finger pads
to press the touch buttons.
edges. Use cookware with a flat, smooth
bottom. See
cookware for induction hotplates"
section.
This is normal for cookware and does
not indicate a fault.
This is normal, but the noise should
subside or completely disappear
when the heat setting is reduced.
This is normal and no action is
required. Do not interrupt the power
supply of the induction hob while the
fan is running.
Use cookware suitable for induction
cooking. See
cookware for induction hotplates"
section.
Make sure the cookware is in the
centre of the hotplate.
Make sure
cookware is as large as the hotplate.
the "Appropriate
the "Appropriate
the bottom of the
en-59