How To Use The Hybrid Trainer - Pro-Form HYBRID TRAINER PFEL03721C.0 User Manual

HOW TO USE THE HYBRID TRAINER

HOW TO PLUG IN THE POWER ADAPTER
IMPORTANT: If the hybrid trainer has been exposed
to cold temperatures, allow it to warm to room tem-
perature before you plug in the power adapter (A).
If you do not do this, you may damage the console
displays or other electronic components.
Plug the power
adapter (A) into
the receptacle
on the frame of
the hybrid trainer.
Then, plug the
power adapter
into an appropri-
ate outlet that is
properly installed in accordance with all local codes
and ordinances.
HOW TO MOVE THE HYBRID TRAINER
Take any necessary measures to protect your floor.
Lift the rear stabilizer (B) until the hybrid trainer will roll
on the wheels. Carefully move the hybrid trainer to the
desired location, and then lower it to the floor.
B
HOW TO LEVEL THE HYBRID TRAINER
If the hybrid trainer
rocks slightly on
your floor dur-
ing use, turn one
or both of the
leveling feet (C)
beneath the rear
stabilizer until the
A
rocking motion is
eliminated.
HOW TO USE THE ELLIPTICAL MODE
To use the hybrid
trainer as an
elliptical, first pivot
the pivot bracket
to the high posi-
tion and tighten the
pivot knob (D) into
the upright.
Then, pivot the
right and left small
pedals (E, F) to the
low position.
16
C
C
D
F
E