Table of Contents
Advertisement
Security Pro 7000
Using Programming Shortcuts
A programming shortcut is a number that "jumps" you to a particular spot in the programming
menus.
A series of shortcut numbers takes you directly to the feature or code you want to change.
1.
Enter User Programming.
Local Phone
Remote Phone Access
Touchpad
2.
Enter a programming command sequence.
Time
Date
Regular User Codes
Partition Master Codes
System Master Code
Direct Bypassing Attribute
Remote Access Attribute
Partition Jump Attribute
System Test Attribute
Latchkey Report Attribute
Downloading
Silent Arming
Touchpad Brightness
Volume
Voice Chime
Chime on Close
Time Schedule xx (00-15)
# + 9 + CODE
Dial the phone number + # + CODE + # + 9 + CODE
9 + CODE
* + 020 + TTTT + #
* + 021 + DDMMYY + #
User 00: * + 0300000 + NNNN + #
User 01: * + 0300010 + NNNN + #
User 02: * + 0300020 + NNNN + #
(Continues through User 229)
User 229: * + 0302290 + NNNN + #
If using alphanumeric or fixed display touchpads, use A and B to scroll
through the code attributes and change them as required.
Partition 1:* + 0310 + NNNN + #
Partition 2:* + 0311 + NNNN + #
* + 0320 + NNNN + #
* + 030NNN1 + 1(off) or 2(on) + # (nnn = user no.)
* + 030NNN2 + 1(off) or 2(on) + # (nnn = user no.)
* + 030NNN3 + 1(off) or 2(on) + # (nnn = user no.)
* + 030NNN4 + 1(off) or 2(on) + # (nnn = user no.)
* + 030NNN5 + 1(off) or 2(on) + # (nnn = user no.)
* + 040 + 1(off) or 2(on) + #
* + 041+ 1(off) or 2(on) + #
* + 042 + 0 through 3 + #
* + 043 + 0 through 7 + #
* + 044 + 1(off) or 2(on) + #
* + 045 + 1(off) or 2(on) + #
Start Time: * + 05XX0 + TTTT + #
Stop Time: * + 05XX1 + TTTT + #
Mon:
* + 05XX2 + 1(off) or 2(on) + #
Tues:
* + 05XX3 + 1(off) or 2(on) + #
Wed:
* + 05XX4 + 1(off) or 2(on) + #
Thurs:
* + 05XX5 + 1(off) or 2(on) + #
Fri:
* + 05XX6 + 1(off) or 2(on) + #
Sat:
* + 05XX7 + 1(off) or 2(on) + #
Sun:
* + 05XX8 + 1(off) or 2(on) + #
55
Advertisement
Table of Contents
