Table of Contents
Advertisement
Note
Verify with your installer how
your keychain touchpads are
programmed. See "Appen-
dix A: Keychain Touchpads"
for more information.
Access Codes
Security Pro 7000
Fire Panic Alarm
The Fire panic alarm sounds from all interior and exterior sirens. On monitored systems, the cen-
tral monitoring station responds by calling the fire department.
¾
To activate a Fire panic alarm from a touchpad:
1. Press and hold both
Lighting During a Fire Panic Alarm
If your system is equipped with system lighting, all system lights will turn on and remain on dur-
ing a Fire panic alarm.
Police Panic Alarm
The Police panic alarm sounds from all interior and exterior sirens, scaring off any intruder and
alerting neighbors to the trouble. On monitored systems, the central monitoring station responds
by calling the police.
¾
To activate a Police panic alarm from a touchpad:
1. Press and hold the
¾
To activate a Police panic alarm from a keychain touchpad:
1. Press and hold the
Lighting During a Police Panic Alarm
If your system is equipped with system lighting, all system lights will flash continuously during a
Police panic alarm.
Auxiliary Panic Alarm
The Auxiliary panic alarm sounds from interior sirens only. It is typically set up by your security
dealer, based on your specific needs. On monitored systems, the central station responds by call-
ing the service or agency you specified through your dealer, such as an ambulance service.
¾
To activate an Auxiliary panic alarm from a touchpad:
1. Press and hold the
¾
To send an Auxiliary panic alarm from a keychain touchpad:
1. Press and hold the
Lighting During an Auxiliary Panic Alarm
If your system is equipped with system lighting, all system lights will turn on and remain on dur-
ing an Auxiliary panic alarm.
Siren Time-out
If the system is not disarmed after an alarm, the sirens will continue to sound until the time-out
period is reached. The time-out period can only be programmed by your installer or dealer.
Even though reaching the time-out stops the sirens, the alarm will still be in progress and will
remain so until the system is manually disarmed.
The system requires a valid access code before it will process most commands.
There is one System Master code which serves as the primary User Programming code for your
system. Only a very limited number of users will need to know this code.
There are two Partition Master codes (one for each partition) which allow access to system
operations in their respective partitions.
There are 230 Regular User codes which act like keys to arm and disarm the system. If neces-
sary, they can be assigned to neighbors, baby-sitters, or repair persons for temporary use. Regular
Fire button(s) for 2 seconds.
Police button(s) for 2 seconds.
Lock and
Unlock buttons at the same time for 2 seconds.
Auxiliary button(s) for 2 seconds.
Lights and
Star buttons at the same time for 2 seconds.
13
Advertisement
Table of Contents
