Installing the Hub
Mounting the Hub
After the screws are in place, follow the steps below for mounting the hub
on a wall or under a desk.
1. For a vertical mount (such as a wall), place the bottom of the hub
2. Slide the hub in either of the two diagonal directions to secure the
(Actual size of number 6
by half-inch or
M3 x 12 mm pan head
wood screw)
N o t e
If you would rather use surface-mount brackets than the mounting holes
on the bottom of the hub, you can order J2610B surface-mount brackets by
calling (970) 339-7140.
1-8
against the screws. For a horizontal mount under a surface such as a
desk or table, turn the hub upside down and gently place the hub up
against the screws.
hub into place.