HP AdvanceStack Hub-8U J2610B Hardware Installation And Reference Manual page 25

Installing the Hub
The following illustration shows a hub with an HP ThinLAN Transceiver
Module connected to a thinLAN backbone.
ThinLAN
backbone
Connecting the Hub-8U to a Fiber-Optic Backbone
With an HP Fiber-Optic Transceiver Module for 10Base-FL networks, you
can connect your hub to a fiber-optic backbone. The following illustration
shows a hub with an HP Fiber-Optic Transceiver Module connected to a
fiber-optic backbone:
HP J2606A Fiber-Optic
fiber-optic
Transceiver Module installed
cable
in the AUI/Xcvr Slot
For more information about cabling configuration, see the documentation
accompanying the optional transceiver modules.
See the Designing HP AdvanceStack Workgroup Networks guide for
information on valid network topologies.
1-13