Kit Contents; Alert Symbols And General Restrictions; Environmental Considerations - Unitronics Vision V280 User Manual

Operand Types
Additional product documentation is in the Technical Library, located at www.unitronicsplc.com.
Technical support is available at the site, and from support@unitronics.com.

Kit Contents

Vision controller
Mounting brackets (x4)
3 pin power supply connector
5 pin CANbus connector
CANbus network termination resistor

Alert Symbols and General Restrictions

When any of the following symbols appear, read the associated information carefully.
Symbol
Caution
▪
Before using this product, the user must read and understand this document
▪
All examples and diagrams are intended to aid understanding, and do not guarantee operation
Unitronics accepts no responsibility for actual use of this product based on these examples
▪
Please dispose of this product according to local and national standards and regulations
▪
Only qualified service personnel should open this device or carry out repairs
Failure to comply with appropriate safety guidelines can cause severe injury or property damage
▪
Do not attempt to use this device with parameters that exceed permissible levels
▪
To avoid damaging the system, do not connect/disconnect the device when power is on

Environmental Considerations

▪
Do not install in areas with: excessive or conductive dust, corrosive or flammable gas,
moisture or rain, excessive heat, regular impact shocks or excessive vibration, in
accordance with the standards given in the product's technical specification sheet
▪ Ventilation: 10mm space required between controller's top/bottom edges & enclosure walls
▪
Do not place in water or let water leak onto the unit
▪
Do not allow debris to fall inside the unit during installation
▪
Install at maximum distance from high-voltage cables and power equipment
2
Memory Bits 4096 │Memory Integers, 16-bit, 2048 │Long Integers, 32-bit,
256 │Double Word, 32-bit unsigned, 64 │Memory Floats, 32-bit, 24 │
Timers, 32-bit, 192 │Counters, 16-bit, 24
Meaning
Danger The identified danger causes physical and property damage.
Warning The identified danger could cause physical and property damage.
Caution
Grounding hardware
Rubber seal
Extra set of keyboard slides, according to model
V230/280/290
Description
Use caution.
Unitronics