Unitronics Vision OPLC V350-35-TA24 Installation Manual

Vision™ OPLC™
The Unitronics V350-35-TA24 offers the following onboard I/Os:
12 Digital Inputs, configurable via wiring to include 2 Analog, 2 PT100/TC, and
1 HSC/Shaft-encoder Input
10 Transistor Outputs, 2 Analog Outputs
General Description
V350 OPLCs are micro-OPLCs, rugged programmable logic controllers that comprise:
On-board I/O configuration
Built-in operating panel containing a 3.5" Color Touchscreen and programmable function keys
Communications
I/O Options
Information Mode
Programming
Software,
& Utilities
Unitronics
1 built-in serial port: RS232/RS485
Optional: the user may order and install
one or both of the following modules:
- RS232/RS485/Ethernet
- CANbus
Communication Function Blocks
include: SMS, GPRS, MODBUS serial/IP.
Protocol FB enables PLC to
communicate with almost any external
device, via serial or Ethernet
communications
V350 supports digital, high-speed, analog,
weight and temperature measurement I/Os via:
On-board I/O configuration
Model-dependent
I/O Expansion Modules
Local or remote I/Os may be added via
expansion port or CANbus.
This mode enables you to:
View & Edit operand values, COM port settings, RTC and screen
contrast/brightness settings
Calibrate the touchscreen
Stop, initialize, and reset the PLC
To enter Information Mode, press the <i> button for several seconds.
The Unitronics Setup CD contains VisiLogic software and other utilities
VisiLogic
Easily configure hardware and write both HMI and Ladder control
applications; the Function Block library simplifies complex tasks
such as PID. Write your application, and then download it to the
controller via the programming cable included in the kit.
Utilities
Includes UniOPC server, Remote Access for remote programming
and diagnostics, and DataXport for run-time data logging.
To learn how to use and program the controller, as well as use utilities such as
Remote Access, refer to the VisiLogic Help system.
V350-35-TA24
Installation Guide
1