Part I. Configuration Guide; Login - Yeastar Technology NeoGate TA400 User Manual

NeoGate TA400/800 User Manual

Part I. Configuration Guide

1. Login

The NeoGate TA attempts to contact a DHCP server in your network to obtain
valid network settings (e.g., the IP address, subnet mask, default gateway
address and DNS address) by default.
Please enable DHCP Server in your network to obtain the NeoGate IP address.
How to check NeoGate TA IP address:
1. Pick up the analog phone, then access the voice menu prompt by dialing
"***".
2. Dial "1" to check the IP address.
3. Dial "2" for web access address.
Logging On:
After entering the IP address in the web browser, users will see a log-in screen.
Check the default settings below:
Username: admin
Password: password
In this example, the IP address is 192.168.3.159, the model is TA400.
Figure 1-1 NeoGate TA Login page
Click "Login" to get the welcome page.
5/62