Annex I. Communication Objects - Zennio EyeZen TP User Manual

ANNEX I. COMMUNICATION OBJECTS

"Functional range" shows the values that, with independence of any other values permitted by the bus according to the object size, may be of any use or have a
particular meaning because of the specifications or restrictions from both the KNX standard or the application program itself.
Number
1
2
3
4
5
6
10
11
12
13
14
15
16
17
18
19
20
21
http://www.zennio.com
Size I/O Flags Data type (DPT)
1 Bit C - - T - DPT_Trigger
1 Byte I C - W - - DPT_SceneNumber
1 Byte C - - T - DPT_SceneControl
2 Bytes I/O C R W - - DPT_Coefficient
2 Bytes I/O C R W - - DPT_Luminosity_Offset
2 Bytes O C R - T - DPT_Value_Lux
1 Bit I C - W - - DPT_DayNight
1 Bit I C - W - - DPT_DayNight
1 Bit I C - W - - DPT_Enable
1 Bit I C - W - - DPT_Enable
1 Byte O C R - T - DPT_Scaling
1 Byte O C R - T - DPT_HVACMode
1 Bit O C R - T - DPT_Switch
1 Bit C - - T - DPT_Trigger
1 Bit I C - W - - DPT_Window_Door
1 Bit I C - W - - DPT_Trigger
2 Bytes I C - W - - DPT_TimePeriodSec
2 Bytes I C - W - - DPT_TimePeriodSec
1 Bit I C - W - - DPT_Enable
1 Bit I C - W - - DPT_Enable
1 Bit O C R - T - DPT_Occupancy
1 Byte I C - W - - DPT_Scaling
Functional Range
0/1 [Heartbeat] Object to Send '1'
0 - 63 Scene Input
0-63; 128-191 Scene Output
0 - 80 Correction Factor - Internal Sensor [0, 80] x0.1
-200 - 200 Offset - Internal Sensor
0 - 2000 Luminosity - Internal Sensor
0/1 Day/Night
0/1 Day/Night
0/1 Detection LED
0/1 Detection LED
0% - 100% Occupancy: Output (Scaling)
1=Comfort
2=Standby
3=Economy Occupancy: Output (HVAC)
4=Building
Protection
0/1 Occupancy: Output (Binary)
1 Occupancy: Slave Output
0/1 Occupancy: Trigger
0/1 Occupancy: Slave Input
0 - 65535 Occupancy: Waiting Time
1 - 65535 Occupancy: Listening Time
0/1 Occupancy: Lock
0/1 Occupancy: Lock
0/1 Occupancy: Occupancy State
0% - 100% Sensor Sensitivity
EyeZen TP
Name Function
Sending of '1' Periodically
Scene Value
Scene Value
[-200, 200] Luxes
Luxes
0 = Day; 1 = Night
0 = Night; 1 = Day
0 = Disable; 1 = Enable
0 = Disable; 1 = Enable Only
During the Day
0-100%
Auto, Comfort, Standby,
Economy, Building Protection
Binary Value
1 = Motion Detected
Binary Value to Trigger the
Occupancy Detection
0 = 1 = Detection from slave
device
0-65535 s.
1-65535 s.
0 = Unlock; 1 = Lock
0 = Lock; 1 = Unlock
0 = Not Occupied; 1 =
Occupied
1-100%
Technical Support: http://support.zennio.com
11