Presence Detector - Zennio EyeZen TP User Manual

2.2 PRESENCE DETECTOR

EyeZen TP incorporates six independent presence detection channels, two more for
constant light control and one for occupancy detection.
Presence detection consists in sending objects to the bus whenever the
device observes a moving body (or no longer observes it) in the environment
of the room where it has been installed.
Constant light control consists in sending KNX orders to the dimmer device
that controls the in-room luminaries so the ambient light level remains constant
even if other light sources are present.
Occupancy detection is an algorithm that allows determining whether a
particular space is under occupation no matter if the occupant moves or not
(i.e., no matter if the device is detecting presence in the room or not).
It also allows setting different luminosity setpoints or object types for daytime and night
time as well as activating or deactivating the motion indicator LEDs.
EyeZen TP can also set custom sensitivity of the motion sensor and measure the
luminosity of the room by making certain adjustments. This measurement will be made
according to the type of lens selected.
Please refer to the specific manual "Presence Detector" available in EyeZen TP product
section at the Zennio website (www.zennio.com) for detailed information about the
functionality and the configuration of the related parameters.
ETS PARAMETERISATION
In Presence Detector screen, additional to the parameters of this functionality, lens type
parameter is included.
http://www.zennio.com Technical Support: http://support.zennio.com
EyeZen TP
8