Annex I. Communication Objects - Zennio Presentia W0 User Manual

ANNEX I. COMMUNICATION OBJECTS

"Functional range" shows the values that, with independence of any other values permitted by the bus according to the object size, may be of any use or have
a particular meaning because of the specifications or restrictions from both the KNX standard or the application program itself.
Number
1
2
3
4
5
20
46
50
51
52
53
54
55
56
57
https://www.zennio.com
Size I/O Flags Data type (DPT)
1 Bit C - - T - DPT_Trigger
1 Bit C - - T - DPT_Trigger
1 Bit C - - T - DPT_Trigger
1 Byte I C - W - - DPT_SceneNumber
1 Byte C - - T - DPT_SceneControl
1 Bit C - - T - DPT_Bool
1 Bit C - - T - DPT_Bool
1 Byte O C R - T - DPT_Scaling
1 Bit I C - W - - DPT_DayNight
1 Bit I C - W - - DPT_DayNight
1 Bit I C - W - - DPT_Enable
1 Bit I C - W - - DPT_Enable
1 Bit I C - W - - DPT_Enable
1 Bit I C - W - - DPT_Enable
1 Bit O C R - T - DPT_Switch
1 Bit C - - T - DPT_Start
1 Byte O C R - T - DPT_Scaling
1 Byte O C R - T - DPT_HVACMode
1 Bit I C - W - - DPT_Window_Door
1 Bit I C - W - - DPT_Start
2 Bytes I C - W - - DPT_TimePeriodSec
Functional Range Name
0/1 [Heartbeat] Object to Send '1'
0/1 [Heartbeat] Device Recovery
0/1 [Heartbeat] Device Recovery
0 - 63 [General] Scene: Receive
0-63; 128-191 [General] Scene: Send
0/1 [General] Luminosity (1-Bit)
0/1 [General] Luminosity (1-Bit)
0% - 100% Luminosity - Internal Sensor
0/1 Day/Night
0/1 Day/Night
0/1 Detection LEDs
0/1 Detection LEDs
0/1 Detection LED
0/1 Detection LED
0/1 Occupancy: Output (Binary)
0/1 Occupancy: Slave Output
0% - 100% Occupancy: Output (Scaling)
1=Comfort
2=Standby
3=Economy Occupancy: Output (HVAC)
4=Building
Protection
0/1 Occupancy: Trigger
0/1 Occupancy: Slave Input
0 - 65535 Occupancy: Waiting Time
Technical Support:
Presentia W0
Function
Sending of '1' Periodically
Send 0
Send 1
0 - 63 (Run Scene 1-64)
0 - 63/128 - 191 (Run/Save Scene
1-64)
0 = Over Threshold; 1 = Under
Threshold
0 = Under Threshold; 1 = Over
Threshold
%
0 = Day; 1 = Night
0 = Night; 1 = Day
0 = Disable; 1 = Enable
0 = Disable; 1 = Enable Only
During the Day
0 = Disable; 1 = Enable
0 = Disable; 1 = Enable Only
During the Day
Binary Value
1 = Motion Detected
0-100%
Auto, Comfort, Standby, Economy,
Building Protection
Binary Value to Trigger the
Occupancy Detection
1 = Detection from slave device
0-65535 s.
https://support.zennio.com
13