Annex I. Communication Objects - Zennio Presentia W0 User Manual

ANNEX I. COMMUNICATION OBJECTS

"Functional range" shows the values that, with independence of any other values permitted by the bus according to the object size, may be of any use or have
a particular meaning because of the specifications or restrictions from both the KNX standard or the application program itself.
Number
1
2
3
18
44
48
49
50
51
52
53
54
55
56
57
http://www.zennio.com
Size I/O Flags Data type (DPT)
1 Bit C - - T - DPT_Trigger
1 Byte I C - W - - DPT_SceneNumber
1 Byte C - - T - DPT_SceneControl
1 Bit C - - T - DPT_Bool
1 Bit C - - T - DPT_Bool
1 Byte O C R - T - DPT_Scaling
1 Bit I C - W - - DPT_DayNight
1 Bit I C - W - - DPT_DayNight
1 Bit I C - W - - DPT_Enable
1 Bit I C - W - - DPT_Enable
1 Byte O C R - T - DPT_Scaling
1 Byte O C R - T - DPT_HVACMode
1 Bit O C R - T - DPT_Switch
1 Bit C - - T - DPT_Trigger
1 Bit I C - W - - DPT_Window_Door
1 Bit I C - W - - DPT_Trigger
2 Bytes I C - W - - DPT_TimePeriodSec
2 Bytes I C - W - - DPT_TimePeriodSec
1 Bit I C - W - - DPT_Enable
1 Bit I C - W - - DPT_Enable
Functional Range Name
0/1 [Heartbeat] Object to Send '1'
0 - 63 [General] Scene: Receive
0-63; 128-191 [General] Scene: Send
0/1 [General] Luminosity (1-Bit)
0/1 [General] Luminosity (1-Bit)
0% - 100% Luminosity - Internal Sensor
0/1 Day/Night
0/1 Day/Night
0/1 Detection LEDs
0/1 Detection LEDs
0% - 100% Occupancy: Output (Scaling)
1=Comfort
2=Standby
3=Economy Occupancy: Output (HVAC)
4=Building
Protection
0/1 Occupancy: Output (Binary)
0/1 Occupancy: Slave Output
0/1 Occupancy: Trigger
0/1 Occupancy: Slave Input
0 - 65535 Occupancy: Waiting Time
1 - 65535 Occupancy: Listening Time
0/1 Occupancy: Lock
0/1 Occupancy: Lock
Presentia W0
Function
Sending of '1' Periodically
0 - 63 (Run Scene 1-64)
0 - 63/128 - 191 (Run/Save Scene 1-
64)
0 = Over Threshold; 1 = Under
Threshold
0 = Under Threshold; 1 = Over
Threshold
%
0 = Day; 1 = Night
0 = Night; 1 = Day
0 = Disable; 1 = Enable
0 = Disable; 1 = Enable Only During
the Day
0-100%
Auto, Comfort, Standby, Economy,
Building Protection
Binary Value
1 = Motion Detected
Binary Value to Trigger the Occupancy
Detection
0 = 1 = Detection from slave device
0-65535 s.
1-65535 s.
0 = Unlock; 1 = Lock
0 = Lock; 1 = Unlock
Technical Support: http://support.zennio.com
11