Advertisement
Quick Links
WARNING: FAILURE TO FOLLOW INSTALLATION INSTRUCTIONS AND NOT
USING THE PROVIDED HARDWARE MAY DAMAGE THE INTERCOOLER
SYSTEM, ENGINE AND COMPONENTS!!!
*Do not attempt to install the intercooler system while the engine is hot.
Severe burn could result from touching hot engine components!
Report any defective or missing parts to the authorized Injen dealer you purchased this product from. Before installing any parts of this system,
please read the instructions thoroughly. If you have any questions regarding installation, please contact your Injen Technology dealer. Installation
DOES require some mechanical skills. A qualified mechanic is always recommended.
Page 1 FM1573I
244 Pioneer Place Pomona California 91768 U.S.A Office: (909) 839-0706 FAX: (909)839-0427 Email:Tech@injen.com WWW.INJEN.COM
Instruction Manual
A
P/N:FM1573i
Vehicle Application: Make:
Honda
Model: Civic / Civic Si 10th gen
Year: 2016-2018
Engine:
1.5L 4-cyl. Turbo
Item
Qty
P/N
A
1
#FM1573i
TOOLS REQUIRED
•Pliers
•Ratchet
•13mm Socket
•10mm Socket
•8mm nut drive
•Allen key
•Flat Blade Screwdriver
•Phillips Screwdriver
•5.5mm nut driver
•7mm nut driver
Discription
Intercooler
Advertisement
Related Manuals for injen technology FM1573i
Summary of Contents for injen technology FM1573i
- Page 1 Report any defective or missing parts to the authorized Injen dealer you purchased this product from. Before installing any parts of this system, please read the instructions thoroughly. If you have any questions regarding installation, please contact your Injen Technology dealer. Installation DOES require some mechanical skills.
- Page 2 10mm socket or wrench. intercooler to the intercooler pipe. Save shroud. This will not be used in the vehicle in the intercooler plastic shroud on with the injen intercooler. bracket and screws for later use. passenger side. Page 3 FM1573I...
- Page 3 Bracket Bracket Install the bracket to the driver side. Install the grommet to the injen Install the bracket to the passenger Secure and tighten. Now install injen intercooler. intercooler fitting. side. Secure and tighten. Page 4 FM1573I...
- Page 4 4. Injen Technology recommends you periodically check clearance and adjust if needed! Failure to check the alignment and adjust thein- tercooler can cause damage that will void the warranty. Injen Technology is not responsible for any damages caused by/from improper in- stallation.
Need help?
Do you have a question about the FM1573i and is the answer not in the manual?
Questions and answers