injen technology SP7035 Installation Instructions

Part number SP7035
2012-2017 Chevrolet SONIC
1.8L 4cyl.
1- 1 pc. cold air intake
1-
2.75"web/nano performance dry filter
1- Step hose
2.50"-2.75"
2- Power Bands
#052
1- Vibramount
2- M6Nuts
2- Fender washers
2- M4x16 button head (#6072)
1- 4 page instruction
Note: All parts and accessories now
sold on-line at :
"injenonline.com"
Figure 1
Page 1 of part# SP7035
Warning: Manufactures attempting to duplicate Injen's
1- Calibration Method for Air Intake Tracts for Internal Combustion Engines.
2- Calibration Device for Air Intake Tracts for Internal Combustion Engines.
3- Calibration Method and Device for Air Intake Tracts having Air Fusion Inserts
Congratulations! You have just purchased the best engineered,
dyno-proven cold air intake system available.
Please check the contents of this box immediately.
Report any defective or missing parts to the Authorized Injen
Technology dealer you purchased this product from.
Before installing any parts of this system, please read the instructions
(#1013)
thoroughly. If you have any questions regarding installation please
(#3116)
contact the dealer you purchased this product from.
(#4003)
Installation DOES require some mechanical skills. A qualified
mechanic is always recommended.
(#6020)
*Do not attempt to install the intake system while the engine is hot.
(#6002)
The installation may require removal of radiator fluid line that may
(#6010)
be hot.
Injen Technology offers a limited lifetime warranty to the original
purchaser against defects in materials and workmanship. Warranty
claims must be handled through the dealer from which the item was
purchased.
Injen Technology 244 Pioneer Place Pomona, CA 91768 USA
Please check the contents of this box immediately.
Note: This intake system was Dyno-tested with an Injen filter and
Injen parts. The use of any other filter or part will void the
warranty and CARB exemption number.
Parts and accessories are available on line at "Injenonline.com
Note: Injen strongly recommends that this system be installed by a
professional mechanic.
"The World's First Tuned air Intake System!"
Factory safe air/fuel ratio's for Optimum performance
"At Injen Technology, we didn't copy the step down process, we
patented process will now face legal action.
MR Technology Step down process:
MR Technology
Patent# 7,359,795
Now equipped with "Air Fusion" Patent pending
invented it!"
Figure 2
Covered under Patent# 7,359,795
Published and patent pending
Published and patent pending