injen technology SP1571 Instructions

Part number SP1571
2012-15 Honda Civic
1.8L 4cyl. (9th gen)
1- 2 pc. cold air intake
MR Tech and Air Fusion
with
1-
3" webb/nano fiber dry filter
1-
2.50x2.75" step hose
1- straight hose
3"
2- Power Bands
#040
2- Power Bands
#048
2- M6 vibra-mount
2- M6 flange nuts
2- Fender washer
1- Vinyl 1/4" coupler
1- Vinyl Trim @6"Long
1- 15mm hose@7.5"Long(#3079)
1- 4 page instruction
Note: All parts and accessories now
sold on-line at :
"injenonline.com"
Note: The C.A.R.B. Exempt sticker must
be attached under the hood in a manner
that is easily viewed by an emissions
inspector.
CARB E.O. 2012-2013 Models Only
Figure 1
"The World's First Tuned air Intake System!"
Factory safe air/fuel ratio's for Optimum performance
Injens tuning process covered by three U.S. Patents
Congratulations! You have just purchased the best engineered, dyno-
proven cold air intake system available.
Please check the contents of this box immediately.
equipped
Report any defective or missing parts to the Authorized Injen
Technology dealer you purchased this product from.
(#1020)
Before installing any parts of this system, please read the instructions
thoroughly. If you have any questions regarding installation please
(#3116)
contact the dealer you purchased this product from.
(#3044)
Installation DOES require some mechanical skills. A qualified
(#4003)
mechanic is always recommended.
(#4004)
*Do not attempt to install the intake system while the engine is hot.
(#6020)
The installation may require removal of radiator fluid line that may be
hot.
(#6002)
Injen Technology offers a limited lifetime warranty to the original pur-
(#6010)
chaser against defects in materials and workmanship. Warranty
(#8008)
claims must be handled through the dealer from which the item was
(#6023)
purchased.
Injen Technology 244 Pioneer Place Pomona, CA 91768 USA
Note: This intake system was Dyno-tested with an Injen filter and
Injen parts. The use of any other filter or part will void the
warranty and CARB exemption number.
Parts and accessories are available on line at "Injenonline.com
Warning: Manufactures attempting to duplicate Injen's
1- Calibration Method for Air Intake Tracts for Internal Combustion Engines.
2- Calibration Device for Air Intake Tracts for Internal Combustion Engines.
3- Calibration Method and Device for Air Intake Tracts having Air Fusion Inserts
Note: Injen strongly recommends that this system be installed by a profes-
sional mechanic.
Cyborg Intake System
Please check the contents of this box immediately.
patented process will now face legal action.
MR Technology Step down process:
Figure 2
Covered under Patent# 7,359,795
Published and patent pending
Published and patent pending