Updating System Software - SMART Board SPNL-6365-V3/SBID-6365 Installation And Maintenance Manual

CHAPTER 6
MAINTAINING THE DISPLAY

Updating system software

When the display is connected to the Internet, it updates its system software automatically.
When a system software update is available, the display downloads the update in the background
then waits for four hours of inactivity. When that happens, the display shows a two-minute
countdown before beginning the update. The countdown can be interrupted at any time. The
update begins when the countdown finishes. The display shows a blank screen for four minutes.
When the update is complete, the display shows the Whiteboard and any content that was on
Whiteboard before the update.
NOTES
You can configure your organization's network to allow or prevent automatic system
l
software updates.
Alternatively, you can download system software updates at
l
update your display using a USB drive.
If the display has downloaded the system software update but hasn't yet applied the update, you
can start the update process manually from Settings.
To apply an automatic system software update manually
1. Scroll to Auto Update.
2. Under Check for Updates Now, tap Apply Update Now.
45 smarttech.com/kb/171167
smarttech.com/downloads and