Chapter 4: Turning On The Display For The First Time - SMART Board SPNL-6365-V3/SBID-6365 Installation And Maintenance Manual

Chapter 4
Turning on the display for the first
time
Turn on the display after mounting it and connecting power and devices.
To turn on and set up the display for the first time
1. Flick the switch beside the AC power inlet to the ON (I) position.
2. Select your preferred language, and then tap Next.
3. Select your country, and then tap Next.
4. Select your time zone, and then tap Next.
5. Set the date, and then tap Next.
6. Set the time, and then tap Next.
7. Name the display, and then tap Next.
8. If the display isn't using a wired network connection, select a wireless network, and then tap
Next.
IMPORTANT
The display needs an internet connection for downloading and installing important updates.
Ask the network administrator to confirm that the network has been correctly configured for
the iQ experience. For more information about network configuration, see
SMART display with the iQ experience to a
33 smarttech.com/kb/171167
network.
Connecting a