Table of Contents
Advertisement
3. OPERATING INSTRUCTIONS
a. Selection of the sandpaper
The drywall sander is equipped with 6 pcs of sanding paper (80/100/120/150/180/240).
This abrasive is suitable for most applications. 120 and 240 abrasive discs are available
for works requiring a smoother finish.
According to the material and grinding effect, choose the appropriate sandpaper.
Material
Pigment
Paint
Filling agent
Interstitial material
Pigment layer drips and
convex surface
Flat bottom material
b. Replacement of sanding paper
Before installing the new paper, the wheel must be clear from dirt. Clean it by using a
brush. The surface of the adhesive disc has a lint layer that can quickly and easily be
installed flocking self-adhesive sandpaper. The sandpaper surface has to be pressed on
the adhesive disc.
c. Installation of the pad (sanding and delta pad)
Push the two locking device localized on the side of the bracket. If already installed,
remove the current pad by turning it a little. Install the pad and release the locking device.
Check if the pad is well installed.
Usage
Removal of pigment layer
Removal of paint
Sanding pigment (such as finishing bottom)
Removal of pickling, sanding residues
Removal brushing marks
Good finished sanding for new painting
10
Sandpaper
40
60
80
100
120
180-240
Advertisement
Table of Contents
