Ac/Dc Output Settings - Larson Davis HVM100 Manual

AC/DC Output Settings

The weighting filters work in con-
junction with the bandlimiting filters.
See page 1-7.
A C / D C O u t p u t X
A C : W e i g h t e d
A C / D C O u t p u t X
A C : B a n d L i m i t
A C / D C O u t p u t X
D C : r m s
A C / D C O u t p u t X
D C : m i n
A C / D C O u t p u t X
D C : m a x
A C / D C O u t p u t X
D C : p e a k
A C / D C O u t p u t X
∑
D C : r m s
A C / D C O u t p u t X
∑
D C : m i n
A C / D C O u t p u t X
∑
D C : m a x
A C / D C O u t p u t X
D C : p e a k
4/11/03
∑
Setting Description
AC: This will weight the output pin for the selected
channel according to the weighting selected
Weighted
for that channel. If Channel X has a weighting
of Ws, then the output pin for Channel X will
produce a Ws weighted AC signal.
This will weight the output pin for the selected
AC: Band-
channel according to the Band Limiting filter,
Limit
specified in chapter 1, for that channel. For
example if Channel X has a weighting of Wh,
then the output pin for Channel X will produce
a band limited (6.3 to 1250 Hz) AC signal.
DC: rms This signal will be a DC voltage with a level
proportional to the RMS level displayed on the
HVM100.
DC: min This signal will be a DC voltage with a level
proportional to the min level displayed on the
HVM100.
This signal will be a DC voltage with a level
DC: max
proportional to the max level displayed on the
HVM100.
This signal will be a DC voltage with a level
DC: peak
proportional to the peak level displayed on the
HVM100.
DC: rms ∑
This signal will be a DC voltage with a level
proportional to the RMS sum level displayed
on the HVM100.
DC: min ∑
This signal will be a DC voltage with a level
proportional to the min sum level displayed on
the HVM100.
DC: max ∑
This signal will be a DC voltage with a level
proportional to the max sum level displayed on
the HVM100.
DC: peak ∑
This signal will be a DC voltage with a level
proportional to the peak sum level displayed
on the HVM100.
Tools Menu 3-7