Table of Contents
Advertisement
Gain X, Y, Z
Hint:
NOTE: To view each selection, first press
the c key, and then press the r or l
arrow key to scroll through each selec-
tion.
4-2
The selections for the gain will be either 0, 20, 40, or 60 dB.
Once the gain selection is stable, press the c key to save the
settings. The HVM100 must be stopped and reset before the
Auto-Range function can be used.
This setting is in the Range menu. To access the Range menu press the
RANGE key and then use the u and d arrow keys to navigate
through the menu items.
The Gain settings in the HVM100 will perform manually
what the Auto-Range setting did automatically. You can
select one channel at a time, and manually assign a gain set-
ting to that channel. The choices are 0, 20, 40, or 60 dB.
To set the Gain for the X channel, first press the RANGE
key to open the Range menu. Next press the d arrow key
once to view the Gain X parameter. Press the c key to enter
the change mode, use the r or l arrow keys to select the
desired value, and press the c key again to confirm the
change. The Gain Y and Gain Z displays are located just
below the Gain X display. (From the Gain X display press
the d arrow key once to view the Gain Y display. Press the
d arrow key again to view the Gain Z display.)
G a i n X
4 0 d B
HVM100 User Manual
4/11/03
Advertisement
Table of Contents
