WAMGROUP TOREX VM Series Assembly And Main Instructions For Use And Maintenance page 15

3.2.2 Accessories: Control Unit VMX
The control unit VMX allows:
- drive the opening / closing of the VM valve
- adjust the control pressure
- detect the presence of the control pressure on the valve
Code Description
Control Unit (without
VMX01N
solenoid valve)
T-6740010020 24 VAC solenoid valve
6740010060 115 VAC solenoid valve
T-6740010080
230 VAC solenoid valve
T-6740010030 24 VDC solenoid valve
Important
On ordering the control unit, it is necessary to also require the solenoid valve, by specifying the code
on the basis of the supply voltage.
3.0 TECHNICAL INFORMATION
Technical data and codes
Control unit
Operation
temperature
-10°C +40°C
-10°C +40°C
AIR OUT
Coil
(VM)
VM
Case Power
Polymer
IP55
5.5 VA
5.5 VA
IP65
5.5 VA
6 W
AIR IN
Pressure
switch
(Line)
11
TOR.VM.--.M.A.0518.EN Issue: A
Pressure switch
N.O+N.C
Max.230 VAC 0.5 A (Inductive)
Max.24 VDC 4A (Resistive)
Rod diameter: 9 mm
Format: DIN 43650 (22mm)
Connector included
Pressure
regulator
05.18
2