Pre-Test Preparations - Sony Xpreia acro S Working Instructions

1

Pre-Test Preparations

Process flow –
1.1
Test (WRT) for incoming units
This process flow is a complement to the process flow in the 1220-1333 Generic Repair Manual.
1. Unpack and handle the unit according to your local instruction and check of warranty.
2. Try to determine whether the unit has been exposed to abuse by doing a close general visual
inspection, according to chapter 4 1220-1333 Generic Repair Manual.
3. General condition inspection of the sealings at the Cap Audio Jack, Cap Micro SD, Cap SIM, Cap
HDMI and Cap Micro USB. Check the Liquid Indicator. This check up will give you an indication
whether the unit has been in contact with liquid.
4. Perform a Water Resistance Test to verify if the unit is water resistance or not.
5. The unit must be rejected if the visual inspection or the Water Resistance Test shows any kind of
abuse of the unit.
6. Otherwise shall the unit be handled in the ordinary repair flow.
1267-1077 Rev 2

Sony Mobile Communications AB – Company Internal
Water Resistance
1.
Incoming unit
2.
Fail
Visual
inspection
OK
4. WRT
5. Customer abuse
Reject
OK
3.
Fail
Water intrusion
inspection
Fail
Ordinary repair flow
Test Instructions (mech)
OK
6.
4(32)