1
Pre-Test Preparations
Pre-Test Preparations
1.1
Hardware
1.1.1 Water indicator inspection
Before starting any tests the liquid intrusion indicator has to
be checked.
The Water Indicator is located as shown in these pictures.
1. The first is located as shown in the picture after removing
Battery Cover Assy
2. The second one is locate on the ANT Board as shown
after removing Rear Cover.
If affected (red color) - handle the phone according to the
local directives.
If not affected by liquid, proceed to the 'Pre-Test
Preparation' below.
1277-1359 Rev 2
© Sony Mobile Communications AB – Company Internal
Test Instructions (mech)
4(25)