Reassembly; Pba & Pba Flex Module & Sheet Key Fpc & Spacer Felica - Sony Xpreia acro S Working Instructions

5

Reassembly

The reassembly is done in the following order:
1. PBA (a) & PBA Flex Module (b) & Sheet Key FPC (c) &
Spacer Felica (d)
2. Rear Cover Assy
3. Camera with the holder
4. Gasket Main
5. Touch/Display Front Cover Assy
6. Caps (a) & Charger PAD connector (b) & Keys (c)
7. Cover Back
8. Core Unit Label
9. Cover Bottom
10. SIM Connector
5.1 PBA & PBA Flex Module
& Sheet Key FPC & Spacer
Felica
Place the PBA Flex Module onto the PBA as shown in
picture.
Make sure the Vibrator connector is NOT between the
PBA Flex Module and the PBA!
Press to secure its position of this side.
1267-1071 Rev 2

Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
56(76)