Vibrator; Vibrator Not Generating Alerts - Sony Xpreia acro S Working Instructions

Problem Areas
1.9

Vibrator

1.9.1 Vibrator not generating alerts

Note: Ensure the BtB connector of Battery is
disconnected in the following steps!
Check:
Inspect the BtB connector of the Vibrator to the PBA.
Action:
1. If not properly connected – disconnect and reconnect.
2. If dirty or oxidized – clean them.
3. If the Vibrator or its BtB connector is damaged – replace
the Vibrator.
4. Replace PBA.
1267-1086 Rev 2

Sony Mobile Communications AB – Company Internal
Troubleshooting Guide (mech)
26(72)