Water Indicator - Sony Xpreia acro S Working Instructions

Replacement

4.36 Water Indicator

Carry out the Removal as described below.
Prepare a new Water Indicator.
Carry out the Installation as described below.
REMOVAL
Pull upwards to release the Cap Micro SD with fingers.
Do not touch the sealing rubber of the Cap Micro SD!
Make sure that the Cap Micro SD is clean, no dirt,
particles and fiber attached on it!
Detach to remove the Water Indicator as shown.
Scrap! Not to be reused!
INSTALLATION
Attach a new Water Indicator on the correct position as
shown and press to secure its attachment.
1267-1071 Rev 2

Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
53(76)