Pre-Test Preparations; Hardware; Water Indicator Inspection - Sony Xperia miro Test Instructions

1

Pre-Test Preparations

1.1

Hardware

1.1.1 Water indicator inspection

Before starting any tests the liquid intrusion indicator has to
be checked.
The Water Indicator is located as shown in this picture after
the Cover Battery Assy is removed.
If affected (red color) - handle the phone according to the
local directives.
If not affected by liquid, proceed to the 'Pre-Test
Preparation' below.
1266-5135 Rev 1

Sony Mobile Communications AB – Company Internal
Test Instructions (mech)
4(22)