Key Gasket (For Key Volume) - Sony Xpreia acro S Working Instructions

Replacement

4.26 Key Gasket (for Key Volume)

Follow the 3.1 – 3.5 Disassembly instructions!
Follow the 4.34 Removal instructions!
Carry out the Removal as described below.
Prepare a new Key Gasket.
Carry out the Installation as described below.
Follow the 4.34 Key Installation instructions!
Follow the 5.6 – 5.10 Reassembly instructions!
REMOVAL
Detach to remove the Key Gasket by using a Flex Film
Assembly Tool.
Scrap! Not to be reused!
Do not damage the plastic surface!
INSTALLATION
Use an air gun to clean the hole of the Key Gasket!
Do not damage the sealing rubber of the Key Gasket
when mounting!
Make sure that the Key Gasket is clean and no dirt,
particles and fiber attached on it! Otherwise replace a
new one.
Place a new Key Gasket on its proper position.
Press to secure its solid attachment.
Do not touch the central area of the Key Gasket!
Make sure the key gasket solid attachment onto plastic
surface, no floating and no damaging!
1267-1071 Rev 2

Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
38(76)