Disassembly
Remove the Touch/Display Front Cover Assy.
3.7
Gasket Main
Gently lift up the Gasket Main to remove it by using a Flex
Film Assembly Tool as shown in picture.
Do not damage the Gasket Main!
Make sure that the Gasket Main is clean, no dirt,
particles and fiber attached on it!
3.8
Camera with the holder
Disconnect the BtB connector by using a Front Opening
Tool.
Be careful! Do not damage the components around the
BtB connector!
Insert the Front Opening Tool and gently pull upwards to
release the Camera from the cavity.
Be careful! Do not damage the Camera!
1267-1071 Rev 2
Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
14(76)