Battery & Foil Adhesive Battery - Sony Xpreia acro S Working Instructions

Replacement
4.21 Battery & Foil Adhesive Battery
Follow the 3.1 – 3.10 Disassembly instructions!
Carry out the Removal as described below.
Prepare a new Battery and a new Foil Adhesive Battery.
Carry out the Installation as described below.
Follow the 5.1 – 5.10 Reassembly instructions!
Battery and Foil Adhesive Battery cannot be reused!
REMOVAL
Carefully slide and lift in below removal actions! Do not
deform the PBA! Do not damage the components on the
PBA!
Insert two Guitar Picks into the gap between the Battery and
the PBA as shown and gently slide back and forth to detach
the Battery.
First insert one Guitar Pick to slide and gently lift upwards to
make a gap between the Battery and the PBA on the
opposite side, then insert two Guitar Picks and gently slide
back and forth to release this side.
Gently lift upwards to release this side by using two Guitar
Picks as shown.
1267-1071 Rev 2

Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
26(76)