Replacement
4.23 Gasket Dot Connector
Follow the 3.1 – 3.6 Disassembly instructions!
Carry out the Removal as described below.
Prepare a new Gasket Dot Connector.
Carry out the Installation as described below.
Follow the 5.5 – 5.10 Reassembly instructions!
REMOVAL
Detach to remove the Gasket Dot Connector by using a Flex
Film Assembly Tool.
Scrap! Not to be reused!
INSTALLATION
Place a new Gasket Dot Connector on its proper position as
indicated by the golden area.
Press to secure its attachment.
1267-1071 Rev 2
Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
34(76)