Table of Contents
Advertisement
3. Description of machine
The FET table saw is a well thought-out machine for all
occurring sawing tasks in the range of small and fine applica-
tions.
A powerful motor, solid mechanics, high-quality materials and
meticulous production make this a reliable tool for all possi-
ble sawing applications.
Depending on the utilised saw blades, all types of wood,
many non-ferrous metals, ceramics and plastics as well as
many other materials can be processed with the machine.
The corresponding saw blades can be obtained from Prox-
xon and will be mentioned in more detail later on.
The bench is made of stable aluminium die casting and
forms one unit together with the motor suspension: The guar-
antees the highest strength and naturally also affects the pre-
cision of the working results.
To guarantee the highest possible flexibility, we offer different
types of limit stops that are included with the machine. So
there is something for every application:
There is a longitudinal stop that runs in a guide along the
front of the bench that can be easily shifted and arrested by
hand, or which can be used with the precisely adjustable
graduated scale.
Adjusting capabilities in the tenth of a millimetre range leave
nothing to be desired and make it easy to saw work pieces to
the desired, previously adjusted measure.
In addition there is a sophisticated and precise angle stop
which can be extended with an aluminium profile strip with a
moving clamping piece for the exact reproduction of many
parts to be sawed out with equal angles and each with the
same dimensions.
The safety aspect was taken care of as well: The saw blade
is covered by a sturdy saw blade guard which automatically
moves up when contact is made with the work piece, and
which only releases as much of the saw blade as necessary.
Caution!
For your own safety, it is understood that the saw may never
be operated without this protective guard!
The upper part of the device is hinged so that it can be
opened for cleaning and maintenance purposes. Thus the
interior of the device can be cleaned of chips and dust with a
vacuum cleaner, for example. To exclude any kind of hazard,
a switching contact disconnects the electrics from the power
mains when the upper housing part is open.
But during all cleaning, maintenance and adjusting work (and
of course during sawing) please remember that your FSK is
not a play toy but a tool for woodworking and is thus a poten-
tial source of danger!
Among others a push-rod for the secure feed of more com-
pact work pieces and two Allen keys are also included in the
delivery. These can be stored in a „key parking slot" on the
right side of the housing.
In the interests of your own safety, please carefully read
through and comply with the attached safety notes, which are
also mentioned in these instructions, and make sure that you
have also understood them!
16
4. Legend (fig. 1)
1. Saw blade guard
2. Saw table
3. Saw blade
4. Connection for dust suction
5. Longitudinal stop
6. Key parking slot
7. Rubber connecting piece for suction
8. Allen key
9. Allen key
10. Push-rod
11. Angle stop
12. Knurled screw for fine adjusting
13. Motor unit
14. Angle scale for saw blade tilt
15. Saw blade adjustment for depth of cut
16. Clamping piece
17. Limit stop strip
18. Mains cable
19. On - Off switch
20. Scale for longitudinal stop
21. Extendable saw support
22. Auxiliary stop
5. Technical data
Rotational speed:
Saw blade diameter max.
Depth of cut max.:
Saw blade drill hole:
Splitting wedge thickness
Dimensions (in mm):
Width:
Depth:
Height:
Motor:
Voltage:
Power consumption:
Noise level:
LWA 102.7 dB(A)
Vibration
Only use in the house
Do not dispose of the device in
household waste
6. Setting up the saw
6.1. Unpacking
Caution!
Please note that transport blocks have been attached to the
device during packing to avoid damage during transportation.
Make sure you remove all of them before commissioning!
Carefully read through the instructions and especially
observe the following chapter!
7000/min
85 mm
25 mm
10 mm
1.2 mm
300 mm
320 mm
170 mm (with saw
blade guard approx.
220 mm)
220/240 Volt, 50/60 Hz
200 W KB 10 min
LPA 89,7 dB(A)
< 2.5 m/s
Advertisement
Table of Contents
