By purchasing your PROXXON MICRO Band Saw • if it is used for other purposes it is not intended and MBS/E, you have chosen a good-quality, high-grade designed for; machine. • if it is used for other purposes which are not speci- In order to operate the MICRO Band Saw safely and fied in the instruction manual;...
jewelry which may get caught in moving parts. 2. DO NOT OPERATE this machine while tired or Non-slip footwear is recommended. under the influence of drugs, alcohol or any med- ication. Wear protective hair covering to contain long hair. 3. OBTAIN ADVICE from a supervisor, instructor, or Exception: The reference to gloves may be omitted another qualified person if you are not familiar with from the instructions for a grinder.
The machine is also equipped with a vacuum-cleaner 3. Screw the brass screw 1 (fig. 3) back in. adapter to help you work in a dust-free environment. We recommend only to use original PROXXON spare parts and saw blades. 6.2. Checking and vertical adjusting of the upper blade guide assembly 5.3.
Page 9
6.2.4. Adjusting tension of the saw blade 7.1.1. Lockable Switch Your MICRO Band Saw is equipped with a lockable Warning! switch (fig. 9 b): It allows you to make the saw child- Always disconnect the machine from the power source proof and makes any other unauthorized use impracti- while adjusting the blade tension! cal as well.
"). A diamond saw band must only be used in combination with a correctly mounted liquid coolant 8.2. Changing the saw blade system. A liquid coolant kit is available by PROXXON as an accessory, see also fig. 13. Don´t work with the Caution! diamond saw blade without appropriate cooling.
NO 28 188 Coolant container: with the 4 socket head cap screws. Plastic container with stopcock, 39" (100 cm) tubing, 2 nipples for the MBS/E table and mounting bracket/screws. Holds 1 quart. 8.4. Care and cleaning of the machine Warning!