Chicco Baby Control Video Digital Plus Manual page 20

the front of the base will turn orange to indicate the
electric contact with the parent unit.
The power indicator LED (5) – LED around the ON/
OFF button (2) – on the parent unit (with image and
sound receiver function) will turn orange to indicate
recharging in process. The number of bars inside the
load status and rechargeable battery pack (14) load
status icon displayed on the back-lit LCD dis-
play (8) will simultaneously progressively increase
from 1 to 3 (for further information please refer to
section "2.2.4 Backlit LCD Display" in this manual).
When the recharging process has been completed,
there will be 3 fi xed bars inside the above indicated
icon and the power indicator LED (5) – LED
around the ON/OFF button (2) – which was previ-
ously orange, will now turn OFF is the parent unit is
switched OFF or it will turn green if the parent unit
is switched ON.
NOTE: It is recommended to recharge the
parent unit (with image and sound receiver func-
tion) for at least 12 hours.
WARNING!
• When using the parent unit, regularly check the
charge status and rechargeable battery pack (14)
charge status icon
power indicator LED (5) – LED around the ON/OFF
button (2). If the colour of the power indicator LED
(5) changes from green to red, and the charge sta-
tus and rechargeable battery pack status icon
starts to blink without any bars, the rechargeable
battery pack has run low. If you wish to continue
using the device, it is recommended to recharge
the battery pack (14), otherwise the device will
stop working.
NOTE: It is possible to reduce recharging
times by switching the unit OFF.
Switching on, Using and Adjusting the unit:
- ON/OFF button on the parent unit (with image
and sound receiver function) (2).
Press the ON/OFF button (2) for around 3 seconds
to turn the parent unit (with image and sound re-
ceiver function) ON. Do not press the button for
longer otherwise the parent unit may not switch on.
Press it again for around 3 seconds to turn the par-
ent unit OFF.
• Volume adjustment buttons (+) and (-) (3).
Press the "+" button (3) +
crease the sound by one level. Press and hold this
button for more than 2 seconds to increase the
volume to the maximum level. Press the "-" but-
ton (3)
+ - once to decrease the sound by one
level. Press and hold this button for more than 2
seconds to decrease the volume to the minimum
level.
The device has 10 volume levels. The factory default
level is 5.
The unit will beep each time you increase or de-
crease the volume level. When the volume reaches
its maximum or minimum levels, it will beep twice.
on the display and the
- once to in-
The device stores the selected volume level in its
memory, and will retain it when switched on and
off in the future.
• Voice activation mode ON/OFF button (7).
The parent unit (with image and sound receiver
function) can operate in continual mode (OFF) or
in voice activation mode (ON).
When operating in voice activation mode (mode
ON) the voice activation function icon
visible on the BACKLIT LCD display (8). The image
of the child is only transmitted in real time when
the microphone (6) picks up sounds/noise from
the child unit (primarily in transmitter mode); the
loudspeaker (6) on the parent unit (with image and
sound receiver function) is then activated and re-
produces the sounds/noise transmitted by the child
unit. When no sound/noise is received for a short
while, the backlit LCD display (8) with the child's
image will switch off and the loudspeaker (6) on the
parent unit (with image and sound receiver func-
tion) will be deactivated.
The voice activation mode allows the parent unit to
operate in energy-saving mode.
The device stores the selected voice activation
mode ON/OFF setting in its memory, and will re-
tain it when switched on and off in the future.
- Multi-function button (9)
The multi-function button (9) allows users to man-
age the following functions on the main menu:
- current date and time settings;
- alarm/reminder settings and activation ;
- brightness adjustment on the BACKLIT LCD dis-
play (8)
- zoom function settings (1x, 2x)
The multi-function button (9) consists in:
- a centre button: used to access the main menu
and confi rm the settings entered for the menu
functions;
- 4 side keys: to browse the main menu, select and
enter the settings for the main menu functions;
• Portable option for the parent unit
The parent unit is fi tted with a belt clip (12) which
means you can carry it with you wherever you go.
2.2.3 Luminous and acoustic operating status
indicator
The power indicator LED (5) - LED around the ON/
OFF button (2) provides three different types of in-
formation:
• Device ON indicator: when the parent unit (with
image and sound receiver function) is ON, the
power indicator LED (5) is green.
• Rechargeable battery pack (14) low battery indi-
cator: if the rechargeable battery pack (14) runs
low, the power indicator LED (5) will turn red,
and the unit will warn the user by beeping once
every second; the black rechargeable battery pack
(14) battery status indicator on the parent unit
BACKLIT LCD display will turn red and blink with
no bars visible
If you wish to continue using the device, it is recom-
mended to recharge the battery pack (14), other-
wise the device will stop working.
Recharge the parent unit (with image and sound
receiver function) rechargeable battery pack insert-
ing it into the slot (16) on the special holder base
(10) and connect the mains adaptor (1) plug into
the mains socket (13) (9V
same holder base (10), in turn connected to the
mains.
20
.
, 600mA) on the
will be