Chicco Baby Control Video Digital Plus Manual page 17

outside, the child unit (with image and sound
transmitter function) and the parent unit (with
image and sound receiver function) must be run
on the alkaline batteries and/or rechargeable bat-
tery pack only: the mains adaptors supplied with
this product are not suitable for use outdoors.
• To prevent the risk of overheating, place the child
unit (with image and sound transmitter function),
the parent unit (with image and sound receiver
function) and above all the mains adaptors away
from all heat sources, such as, for instance, ra-
diators, thermostats, fi res, cooking hobs, windows
exposed to the sun etc.
• Never use the two units in areas where there is
water, i.e. near bathtubs, washing machines, sinks
or on wet surfaces (especially when the units are
connected to the mains). Never dip them in wa-
ter or allow them to get wet. Never use units or
adaptors that have got wet; in such cases please
contact a qualifi ed expert.
• Always place the child unit (with image and sound
transmitter function), the parent unit (with image
and sound receiver function) and the mains adap-
tors where air can circulate to prevent any of the
components from overheating.
• Never use this device near neon lights or other
electrical/electronic devices such as TVs, motors,
PCs etc. These could interfere with its functions.
• Only use the mains adaptors supplied with the
product, or exactly the same type with the same
electrical characteristics. The use of other adap-
tors could damage the child unit and/or parent
unit and endanger the safety of the user.
• Check that the voltage on the mains adaptors (see
information on the mains adaptors) corresponds
to that of your mains supply and that the adaptor
plug is compatible with the sockets on your mains
system.
• Connect the mains adaptors to easily accessible
sockets within reach of the device. Lay the adap-
tor cables to that they can not be trodden on,
they cannot get caught up in other objects or be
touched by children as this could endanger their
safety (they could trip or catch their neck in the
wire).
• The mains adaptors, the child unit (with image
and sound transmitter function) and parent unit
(with image and sound receiver function) could
feel warm to the touch when operating. This is ab-
solutely normal.
• Always disconnect the mains adaptors from the
power sockets when not in use.
• Alkaline batteries and rechargeable battery packs
must only be replaced by adults, using alkaline
batteries or battery packs having the same char-
acteristics as those indicated in this manual.
• The child unit (with image and sound transmission
function) video-camera is fi tted with a photo sen-
sor that automatically activates the infrared LED,
when the light level in the environment decreases
or when it is dark; this means the child can be
viewed in the dark. The child unit (with image and
sound transmission function) video-camera LEDs
emit infrared rays at night which can in no way
endanger the child's health.
• As the child unit (with image and sound transmis-
sion function) video-camera LEDs do not emit a
visible light, check they are working properly by
viewing the image transmitted when the child unit
is places in a dark room.
• The child unit (with image and sound transmission
function) video-camera LEDs emit infrared rays
that do not exceed the Class I LEA required by EN
Standard 60825-1.
WARNING!
It is however recommended to avoid direct view-
ing of the infrared rays with the naked eye or using
optical devices.
WARNING!
TO PREVENT THE RISK OF ELECTRIC SHOCKS,
NEVER REMOVE THE PROTECTION COVER ON
THE MAINS ADAPTORS OR THE BACK OF THE
TRANSMITTER. DO NOT WET THE PRODUCT
AND DO NOT EXPOSE IT TO DAMP OR HUMID
ENVIRONMENTS. NEVER ATTEMPT TO OPEN THE
PRODUCT. THIS CAN ENDANGER YOUR SAFETY
AND WILL INVALIDATE THE WARRANTY.
1. Confi guration & Characteristics
Control devices which use "Adaptive Frequency
Hopping" technologies can be used as an auxil-
iary apparatus to monitor children in domestic
environments. This baby control comes with a child
unit (with image and sound transmitter function)
and a parent unit (with image and sound receiver
function). Both devices use "Adaptive Frequency
Hopping" transmission technology to establish
wireless radio contact that transmits and receives
sound/noise.
1.1 System features
The main system features are:
• Visual and voice transmissions using a "Adaptive
Frequency Hopping" digital system.
• Operating range in open spaces without any ob-
stacles of around 150 metres*.
• User-friendly units.
* The maximum operating distance is around 150
metres in an open space without obstacles and
fully charged batteries (this range could be reduced
considerably indoors according to the environmen-
tal situations, the layout of walls and furniture,
the presence of metal structures, electromagnetic
fi elds/disturbances of internal or external origin,
reinforced concrete walls, when rooms are located
on different fl oors, or when the batteries are not
charged completely etc.)
1.2 Child Unit (with image and sound transmit-
ter function)
Model 06654
1. Powered by switching mains adaptors 100-240V
~ 50/60Hz / 9V
AA/LR6 type batteries (not included).
2. ON/Off button
3. Nightlight
4. Nightlight ON/OFF button
switch-off after 5 minutes, if the device is battery
powered, constant operating mode if the device
is connected to the mains adaptor (1)
5. Power indicator with 2-coloured LED – green/red:
(a) Green: unit ON and ready for normal use (b)
red: alkaline batteries are low
6. Integrated Microphone
7. Integrated speaker to reproduce the lullabies
8. Lullaby function ON/OFF button
17
, 600mA or 4 alkaline 1.5 V
Automatic