Weslo W&S WLIVEX87210.0 User Manual page 6

STEP 4
I: Slip the cover (13) onto the vertical tube (11);
II: Connect the sensor wire (14) to the upper sensor wire
(12), and then fix the vertical tube (11) on the main frame
(1), using the Allen bolts (7), spring washers (36), and flat
washers (15) as shown.
STEP 5
I: Feed the pulse sensor wires (8) out of the vertical tube
(11) through the computer bracket on the top.
Attach the handlebar (5) to the vertical tube (11), secured
with the Allen bolts (7) and spring washers (36) as shown.
II: Attach the front handlebar cover (6) to the Handlebar.
STEP 6
I: Connect all the wires (8 & 12) to the wires come from the
computer (4), and then install the computer onto the com-
puter bracket on the top of the vertical tube (11), secured it
with the cross pan head screws (39) and flat washers (38)
as shown.
II: Attach the rear handlebar cover (9) to the vertical tube
(11), fit the front and rear covers (6 & 9) properly, and then
secure them together with the cross pan head screws (10)
as shown.
5