Replacing Overflow Troughs (Channels) - Bosch SHEM63W55N Repair Manual

Repair

6.13 Replacing overflow troughs (channels)

Required tools:
Phillips screwdriver PH2
Slotted screwdriver Blade 4 mm x 0.8 mm x 100 mm, only
China
Only pull out dishwashers enough to clear hinges.
Prerequisite:
Dishwasher disconnected and pulled out→ Page 76
Toe panel removed→ Page 87
Outer door removed→ Page 79
Base cover removed→ Page 88
1. Pry off clips at each end of the overflow trough.
Save clips for reuse.
2. Carefully pry support from tab on trough (1) and lift support out and away from
dishwasher (2).
2020-04-24_58300000218396_ara_en_c
3. Carefully lift trough up and away from dishwasher.
[00342443]
4. Install in reverse order.
Copyright by BSH Hausgeräte GmbH Page 94 of 126