Disconnecting And Pulling Out Dishwashers - Bosch SHEM63W55N Repair Manual

Repair

6.2 Disconnecting and pulling out dishwashers

▶ Follow these instructions to pull out dishwashers for side or bottom front access.
6.2.1 Disconnecting and pulling out dishwashers
Required tools:
Phillips screwdriver PH2
Pliers
160 mm
Gloves Protective gloves
Dishwashers have power cords which plug into the back of them, on the right side
(viewing the front).
1. Remove base insulation (on models with insulation).
2. Disconnect dishwasher mounting brackets. Brackets can be top or side mounted.
3. Turn off water and disconnect water line at the water supply.
2020-04-24_58300000218396_ara_en_c
4. Turn off electricity and disconnect electric supply.
[00341142]
5. Disconnect drain line at the customer connection.
6. Slide out dishwasher and supply hoses / cords:
1. Slide dishwasher out completely (below left).
2. Disconnect supplies support strap (below center) by lifting top of strap up (1)
and pulling it up and away from the base latch (2).
3. Carefully pull out water supply hose, drain hose and power cord through cab-
inet access hole (below right).
Parts can now be accessed for repairs.
Copyright by BSH Hausgeräte GmbH Page 76 of 126