Replacing Heat Pumps - Bosch SHEM63W55N Repair Manual

Hide thumbs Also See for SHEM63W55N:

Table of Contents

Repair

6.17 Replacing heat pumps

Video tutorial

Required tools:

Hose clamp

inner diameter 28 mm - 39 mm

Torx T20 screwdriver

Phillips screwdriver PH2

Slotted screwdriver

Blade 4 mm x 0.8 mm x 100 mm, only

China

Diagonal cutting nipper

Blanket or towel

Heat pumps (3) are best accessed from the bottom of dishwashers by flipping them on

their backs. Use the same process to access water switches (5) and sumps (1).

Standard hose clamp [00172272] is needed when heat pumps are being

removed, not replaced, since replacement heat pumps already include it.

Prerequisite:

Dishwasher disconnected and pulled out→ Page 76

Dishwasher flipped onto its back→ Page 77

Hose clamp [00172272] provided

2020-04-24_58300000218396_ara_en_c

1. Cut or twist off hose clamp to separate pump from adapter.

[00172272]

[00341279]

[00342443]

–

Production hose clamps require a special tool for assembly / disassembly,

but can be readily removed with diagonal cutters or pliers. Once removed in

this way, they cannot be reused.

–

Replacement heat pumps come with hose clamps.

–

When heat pumps are removed (for access for other repairs), not replaced,

[00172272] hose clamps must be sourced separately since existing clamps

cannot be reused.

2. Disconnect motor support strap (1).

Page 100 of 126

Table of Contents