Installation Instructions - Igloohome Deadbolt 2S Installer/User Manual

Installation Instructions

Measure
If you are replacing your current deadbolt lock, industry standards are 60mm (2.36") or 70mm
(2.75") backset. To determine which backset length you should use, so measure the distance (x)
between the center of 54mm (2.12") hole to door edge.
Prepare bolt assembly based on the distance (x)
Bolt ships with bolt assembly in 60mm (2.36") position. If required, twist the bolt and pull to
extend (simultaneously) to 70mm (2.75") backset position.
Twist upwards
10
Pull
54mm
(2.12")
Hole
Twist downwards
to lock backset position